Allen Bradley SST Card Connection to DH+ Network

Here is a cable diagram or connection diagram of Allen Bradley's SST card connection to the DH+ Network. 6-pin connector connects to the card and 3-pin connector connects to the device. Line 2 of 6-pin connector is the line closest to the LED on the SST PCI card. 

As shown above, both Line2 and Line1 of 6-pin connector are shorted and connected to Line1 and Line2 of the three-pin connector. The shield is connected to the shield in both the connectors. 

If you like this, do not forget to share it with your friends. Do subscribe to receive more such connection diagrams directly in your email.